Transformer for BAH100A

BA50004A
$107.65

Transformers work as ballast components, transforming or amplifying the power coming from the power source, such as the wall outlet,

Transformer for BAH100A

21.8 lbs.
6.3L x 8.5W x 5.5H

Why is my Sunburst system making a loud noise when the toggle switch is in the "None" position?

The "None" position simply indicates that the system is operating in neither HPS nor MH mode. This light system should NEVER be plugged in or receive power when the toggle switch is in the "None" position. Doing so may cause damage to

Which SKU's apply to the Radiant reflector lens systems?

RDUNLENS - replacement lens for the current RDUN model with integrated hangers and built in lamp cord. The unit has side slots for the lens rather than a bracket system. lens only RDLENSYS contains (2) brackets and a lens specifically for the older mod

I have a 1000W ballast. Can I use a 400W or 600W lamp (bulb) in it?

As a general rule, lamps (bulbs) can only be used with ballasts that specify the same wattage rating. A 1000W lamp can only be used with a 1000W ballast, a 400W with a 400W, etc. Many ballasts are made to handle only one wattage level. An exception to

Can an HPS ballast be used to power a metal halide lamp?

This is never recommended. The ballast and lamp (bulb) type (wattage and HID lamp type) must match. Convertible ballasts, however, can be switched between MH and HPS modes. There is also the option of using a conversion lamp. These are lamps that are de

How much weight can the Light Rail 5.0 carry?

The Light Rail 5.0 can support up to 100 lbs. when mounted properly. Note: the greater the weight, the more frequently trolley wheels will need to be replaced.

What if my Sola Rola travels beyond the magnetic stops?

It needs to be resynchronized. First, remove power from the system. Next, remove the magnets from the track. Then, repeat the process for installing the magnetic stops as listed previously in the manual. Make sure the rails are installed at least 6"

My digital 7-day timer won't come on at my programmed time. Is it defective?

First, make sure it is in Auto mode (the screen says AUTO at the bottom). If that doesn't help, the timer might be in Random mode. Press the WEEK and HOUR buttons simultaneously to toggle Random mode on and off (you'll see a circle appear and disappear on

I'm having trouble programming the digital 7-day timer TM01715(D). Is there an alternate set of instructions?

Step 1: Press PROG. Left side of screen should display 1 ON. Step 2: Press WEEK until the desired week schedule is displayed at top of screen. Step 3: Press HOUR and MIN to set the desired time you want the timer to turn the device on. Step 4: Press

How many lights can I plug into a lighting controller that is wired to 120V?

Running your lights at 120V (instead of 240V) will reduce the acceptable amount of ballasts used by half. For example, an 8 light controller, when wired to 120V, can only have a maximum of four 1000W ballasts plugged in. This is because the amperage drawn

Will my dual voltage 120/240V ballast operate on 208V or 277V?

Our Xtrasun and SG magnetic ballasts currently only have 120V & 240V capability. Our Powerhouse ballasts are wired for 120V and 240V, but have the capability to be rewired to 208V or 277V. If you already have a Hydrofarm ballast, consult a certified e

How much weight can the Light Rail 3.5 and 4.0 carry?

If mounted continuously along the rail through all the mounting holes first to a board, and then the board to the ceiling, it will easily carry 75 lbs as long as the board is mounted sufficiently to a structure that will handle the weight. If mounted only

Will this ballast work with a flip box?

If you are using a "Flip Relay Box" and your ballasts are having trouble switching, you must observe the following instructions to ensure proper operation. Most electronic ballasts contain an "error sensing" open circuit safety feature

Which lamps are recommended for use with the Phantom and Xtrasun digital ballasts?

Most lamp brands distributed by Hydrofarm are approved for use in the our digital ballasts. Contact us to find out most up to date compatibility information.

Can I hang larger fixtures from my Jumpstart Stand?

No, the stand is designed to be used only with the single T5 fixture it comes with (JST54/JST52).

How do I re-attach my Hydrofarm Light Track trolly to the chain?

The Hydrofarm Light Track has a small pin that attaches the trolly to the chain. There is one link in the chain that is big enough to fit the pin. Refer to the above PDF for a closer look.

Can the digital heat mat thermostat adjust its setpoints above or below the factory programmed 68 and 108 degrees Fahrenheit?

No. You cannot adjust above or below these setpoints.

Will the digital heat mat thermostat work on a modified sine wave inverter?

No, doing so will damage the thermostat and disrupt temperature control of the heat mat.

What do the error codes mean on my Heat Mat Thermostat?

E1: temperature is below the low limit. Or the temperature sensor has an open circuit. E2: the temperature sensor has a short circuit. E3: temperature is above the high limit. To reset the MTPRTC: Unplug the unit and then while pressing the set bu

What happens to the setting on my MTPRTC if the power goes out?

The MTPRTC will remember its setting if power is lost. If the unit is reset for some reason, the default setting is 80F.

Can the Phantom digital ballast operate different wattage lamps using the dimmability feature?

No, the Phantom dimmable feature is not made to allow different operation of multiple wattages. A 1000w ballast should only operate 1000w lamps, 600w models with 600w lamps, etc.

What are the white plastic pieces and bolts that come with my Dual Raptor used for?

The white plastic pieces are meant to support and protect the cord in the slotted duct flange (two per lamp cord). The six screws are to secure the cordset/mogul to the cordset bracket inside the fixture (three per mogul).