Barbed 1/2" Garden Hose Adapter Fitting

AAPMHF
$7.99

Stuck with just a garden hose to bring water to your indoor garden? Turn your ordinary hose fitting into a barbed fitting with this small and quick-to-install device. This Hydrofarm hose fitting fits all Active Aqua and Pro Pump hoses. Enjoy more water flow options than just a garden hose with this small add-on.

0.3 lbs.
1.8L x 1.0W x 1.0H

Why is my Sunburst system making a loud noise when the toggle switch is in the "None" position?

The "None" position simply indicates that the system is operating in neither HPS nor MH mode. This light system should NEVER be plugged in or receive power when the toggle switch is in the "None" position. Doing so may cause damage to

Which SKU's apply to the Radiant reflector lens systems?

RDUNLENS - replacement lens for the current RDUN model with integrated hangers and built in lamp cord. The unit has side slots for the lens rather than a bracket system. lens only RDLENSYS contains (2) brackets and a lens specifically for the older mod

I have a 1000W ballast. Can I use a 400W or 600W lamp (bulb) in it?

As a general rule, lamps (bulbs) can only be used with ballasts that specify the same wattage rating. A 1000W lamp can only be used with a 1000W ballast, a 400W with a 400W, etc. Many ballasts are made to handle only one wattage level. An exception to

Can an HPS ballast be used to power a metal halide lamp?

This is never recommended. The ballast and lamp (bulb) type (wattage and HID lamp type) must match. Convertible ballasts, however, can be switched between MH and HPS modes. There is also the option of using a conversion lamp. These are lamps that are de

My digital 7-day timer won't come on at my programmed time. Is it defective?

First, make sure it is in Auto mode (the screen says AUTO at the bottom). If that doesn't help, the timer might be in Random mode. Press the WEEK and HOUR buttons simultaneously to toggle Random mode on and off (you'll see a circle appear and disappear on

I'm having trouble programming the digital 7-day timer TM01715(D). Is there an alternate set of instructions?

Step 1: Press PROG. Left side of screen should display 1 ON. Step 2: Press WEEK until the desired week schedule is displayed at top of screen. Step 3: Press HOUR and MIN to set the desired time you want the timer to turn the device on. Step 4: Press

Can I use this pump outdoors?

These pumps are meant for indoor use only.

Will my dual voltage 120/240V ballast operate on 208V or 277V?

Our Xtrasun and SG magnetic ballasts currently only have 120V & 240V capability. Our Powerhouse ballasts are wired for 120V and 240V, but have the capability to be rewired to 208V or 277V. If you already have a Hydrofarm ballast, consult a certified e

Which lamps are recommended for use with the Phantom and Xtrasun digital ballasts?

Most lamp brands distributed by Hydrofarm are approved for use in the our digital ballasts. Contact us to find out most up to date compatibility information.

Can I hang larger fixtures from my Jumpstart Stand?

No, the stand is designed to be used only with the single T5 fixture it comes with (JST54/JST52).

How do I re-attach my Hydrofarm Light Track trolly to the chain?

The Hydrofarm Light Track has a small pin that attaches the trolly to the chain. There is one link in the chain that is big enough to fit the pin. Refer to the above PDF for a closer look.

Can the digital heat mat thermostat adjust its setpoints above or below the factory programmed 68 and 108 degrees Fahrenheit?

No. You cannot adjust above or below these setpoints.

Will the digital heat mat thermostat work on a modified sine wave inverter?

No, doing so will damage the thermostat and disrupt temperature control of the heat mat.

What happens to the setting on my MTPRTC if the power goes out?

The MTPRTC will remember its setting if power is lost. If the unit is reset for some reason, the default setting is 80F.

What do the error codes mean on my Heat Mat Thermostat?

E1: temperature is below the low limit. Or the temperature sensor has an open circuit. E2: the temperature sensor has a short circuit. E3: temperature is above the high limit. To reset the MTPRTC: Unplug the unit and then while pressing the set bu

Can the Phantom digital ballast operate different wattage lamps using the dimmability feature?

No, the Phantom dimmable feature is not made to allow different operation of multiple wattages. A 1000w ballast should only operate 1000w lamps, 600w models with 600w lamps, etc.

What are the white plastic pieces and bolts that come with my Dual Raptor used for?

The white plastic pieces are meant to support and protect the cord in the slotted duct flange (two per lamp cord). The six screws are to secure the cordset/mogul to the cordset bracket inside the fixture (three per mogul).