• APC8200 Autopilot CO2 Monitor & Controller w/15' Remote Sensor

    Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!
    FEATURES:
    Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming
    Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
    Adjustable Trend Chart Zoom levels let you trace your ppm levels
    Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
    2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
    Green LED identification lights inform you of the unit's status at all times
    25499 Views
  • Autopilot CO2 Generators

    Elevated atmospheric CO2 levels show remarkable increases in plant growth productivity, and creating these elevated levels in your grow room is simply the easiest way to accelerate plant growth. Autopilot CO2 generators provide and maintain the carbon dioxide levels needed to meet maximum growing potential, and operate for only pennies a day.

    These highly reliable CO2 generators feature powder-coated steel enclosures that resist moisture, rust and discoloration, providing years of trouble-free operation. They are very safe and easy to operate. The built-in solid-state electronic ignition module creates a spark to light the burners. The units are also equipped with a safety tip over feature that shuts off the gas source if the unit is tipped or falls over. Autopilot generators are available in both propane and natural gas models, along with high-altitude versions in all sizes.

    All models are equipped with:
    Precision manufactured brass burners
    Solid-state electronic ignition module—no pilot light necessary
    TIP OVER switch shuts off gas source if the unit falls or tips over
    SHUT DOWN warning with LED error indicator lights

    Three sizes available—4-burner, 8-burner, and 10-burner (adjustable: 2-, 5-, 7-, or 10-burner option)
    4-Burner: Spaces 14' x 14' and smaller
    8-Burner: Spaces 28' x 28' and smaller
    10-Burner: Spaces 35' x 35' and smaller

    Autopilot CO2 generators are perfectly paired with our line of Autopilot environmental controllers.

    NOTE: These generators require unrestricted airflow through the bottom and must be mounted by hanging/suspending.
    14885 Views
  • Autopilot PX1 Digital Lighting Controller from Hydrofarm – Controller and Ballast Set Up

    The Autopilot PX1 Digital Lighting Controller from Hydrofarm provides centralized, dual-zone digital control of your DE lighting, allowing you to switch, dim and boost multiple USB-compatible Hydrofarm ballasts at once—up to 256 in each of two independent zones for a total capacity of 512 ballasts. The trunk-line cable connections ensure perfect communication between the controller and all ballasts in the chain.

    The PX1 has two dedicated temperature sensors—one for each zone—that provide real-time data for automated temperature-based dimming, as well as a high temperature shutdown feature that protects your garden while you’re away. The PX1 replaces traditional analog lighting relays, and eliminates inrush current. Each of its dual zones provides precise and independent:

    • Photoperiod timing to control light and dark cycles

    • Wattage output control, which allows users to control the intensity of the light being emitted from fixtures

    • Auto-dimming when temperature exceeds set points

    • Emergency auto-shutdown of lights upon user-defined over temperature events

    • Configurable restrike delay times, which eliminates lamp-damaging hot starts

    • Sunrise/sunset simulation settings, which provide a gradual ramp-up and down at both ends of your photoperiod

    • Includes 2 - 20' temperature probes

    • includes 8' 100v-240v 50/60hz power adapter

    The PX1 Digital Lighting Controller is easy to set up, and is compact and lightweight. It is a true digital ballast interface that makes multiple-ballast control easy and affordable to achieve. It is simply more powerful, more reliable, and more capable than competing controllers. The PX1 is designed to work with any Phantom or Hydrofarm ballasts with USB connectivity, and are ideally paired with PARsource DE reflectors and Agrosun DE HPS lamps.

    (*RJ12 connection cables and splitter are included in the ballast box)
    25372 Views
  • Active Air Fan Speed Adjuster

    Hydrofarm's Fan Speed Adjuster was designed especially for centrifugal fans. This means it will help prevent damage to fan motors, ensuring longer life. (Meant for use with brushless motors, and all Hydrofarm inline fans, not booster fans)

    It will correctly and precisely adjust the speed of centrifugal fans. These controllers are more sensitive than any on the market, and are compact and built to last.

    Features

    Internal electronic auto-resetting circuit breaker
    State-of-the-art electronics throughout
    Rated for 350 Watts max
    120VAC voltage capacity
    Hydrofarm Brand “Other” Brands
    Specifically made for use with centrifugal fans. Correctly manipulates input power sine wave for type of motors being controlled. Made for routers (different style of motor). Incorrect clipping of input power sine wave leads to shorter fan life and excessive noise.
    Higher sensitivity control allows precise flow adjustments. Low resolution voltage control doesn’t allow for proper adjustment of flow.
    Stall speed range eliminated to eliminate fan stoppage. Allows fan to stall if fan speed falls.
    Internal self-resetting circuit breaker in case of over-voltage. Must manually replace fuse and/or reset breaker switch, possibly leading to a scenario where your fan isn’t running for an extended period of time.
    NOTE: Use only with ball-bearing inline/centrifugal fans. Not recommended for use with "squirrel cage" type fans or the 12" Max Fan. For the 12" Max Fan, use speed controller CFH0350290.
    2787 Views